Manufacturing Testing Services for SAR

SAR Testing Equipment, San Diego SAR Test Facility.

San Diego Country SAR Testing Facility, RF Exposures' owners Jay Moulton and Tamara Moulton enjoy more than 20 years of SAR industry experience.

Lead technical engineer at RF Exposure Lab, Jay Moulton, is unique in his ability, experience and knowledge of SAR, having background in both manufacturing and regulatory SAR testing. Jay, a graduate from Chapman University with a BA in Engineering and a Masters of Business Administration, has been in the regulatory side of SAR testing since 1981. Jay has worked at NCR/AT&T Corporation in the 1980s, Qualcomm in the 1990s and was the director of engineering at Qualcomm, responsible for regulatory for the entire company before starting his own stand-alone SAR lab. Due to Jay’s vast experience and knowledge of SAR, he was asked to be involved in the 1996 IEEE World Wide Committee that wrote the SAR testing and methodology used to establish the FCC requirements we use today. Jay’s extensive knowledge of SAR allows RF Exposure Lab to provide unique expertise, and guarantee its clients accurate SAR testing, results and solutions.

Lead business manager at RF Exposure Lab, Tamara Moulton has a background in both large and small businesses having earned her CPA at Arthur Young where she audited and assisted many clients in there business pursuits.  Tamara has worked at Glendale Federal Bank as the Vice President of Investor Reporting managing a large staff.  Tamara runs the office for RF and performs audits to comply with A2LA requirements.

Call us today in San Marcos, Northern San Diego County, at (760) 471-2100.

RF Exposure Lab is a worldwide leader in SAR testing standards.

 

 

 

 

 

 

 

 

 

The SAR testing requirement is being added to many countries around the world. Numerous other countries are in the process of evaluating the need to add SAR testing to their requirement. The following is a list of the standards for SAR testing at present.

FCC OET Bulletin 65 Supp. C

Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields

IEEE 1528 Std.- 2003

Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques

Industry Canada – RSS – 102

Radio Frequency Exposure Compliance of Radio Communication Apparatus (All Frequency Bands)

Industry Canada – Health Safety Code 6

Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz

Australian Communication Authority

Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard 2003

Australian Communication Authority

Radiocommunications (Compliance Labelling - Electromagnetic Radiation) Notice 2003

Australian Communication Authority

Radiation Protection Series No. 3 – Maximum Exposure Levels to Radiofrequency Fields – 3kHz to 300 GHz

International Electrotechnical Commission (IEC) – IEC 62209

Procedure to determine the Specific Absorption Rate (SAR) for hand-held mobile telephones in the frequency range of 300 MHz to 3GHz

European Union – EN 50360

Product Standard to Demonstrate the Compliance of Mobile Phones with the Basic Restrictions Related to Human Exposure to Electromagnetic Fields (300 MHz – 3 GHz)

European Union – EN 50361

Basic Standard for the Measurement of Specific Absorption Rate Related to Human Exposure to Electromagnetic Fields from Mobile Phones (300 MHz – 3 GHz)

European Union – EN 50364

Limitation of Human Exposure to Electromagnetic Fields from devices operating in the Frequency Range of 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications

European Union – EN 50371

Generic Standard to Demonstrate the Compliance of Low Power Electronic and Electrical Apparatus with the Basic Restrictions related to Human Exposure to Electromagnetic Fields (10 MHz – 300 GHz) – General Public

RF Exposure Lab, LLC is a privately owned independent A2LA Accredited SAR testing facility located in Southern California. We provide radio frequency device manufacturers and existing FCC test laboratories with a testing and certified report laboratory.

We provide support by selling a total solution with both SAR testing and design suggestions to ensure your product can meet SAR testing limits. We communicate issues to you promptly to support the timely completion of your project. We remain adaptable to the rapidly changing technology of radio frequency devices, and their testing requirements.

We are located in North San Diego County, at 802 N. Twin Oaks Valley Rd. Suite 105 San Marcos, CA 92069. Call us today at (760) 471-2100 for more information about our SAR testing and custom solutions for your cell phones, modems, laptops, medical devices, and more.